2011-2024 Abarth 695 Hatch Wiper Blade Size & Installation Guide
2011-2024 Abarth 695 Hatch Wiper Blade Size & Installation Guide
Need replacement wipers for your 2011-2024 Abarth 695 Hatch? This guide gives you the correct blade sizes, the OG Wipers adapter type, and the matching installation video before you buy.
Fitment checked: 2011-2024 Abarth 695 Hatch
2011-2024 Abarth 695 Hatch wiper blade sizes
| Driver side | 24" (600mm) |
|---|---|
| Passenger side | 14" (350mm) |
| Rear | 12" (300mm) |
| Adapter | Adapter Type 1 |
The OG Wipers kit for the 2011-2024 Abarth 695 Hatch uses a 24" (600mm) driver-side blade and a 14" (350mm) passenger-side blade. The rear blade size is 12" (300mm).
What’s included
The linked OG Wipers product is a vehicle-specific kit selected for the Abarth 695 Hatch. It is designed to remove the guesswork around blade length and connector type.
- Correct front blade sizes for this vehicle
- Rear blade fitment included where the Front & Rear kit option is available
- Adapter Type 1 installation guidance
- NZ-wide delivery from OG Wipers
Before you install
Check that your vehicle matches the year range and body/submodel shown above. If your Abarth 695 has a different body shape, facelift, or import variant, use the site fitment search or contact OG Wipers before ordering.
Tip: do not let the bare metal wiper arm snap back onto the glass while the old blade is removed.
Adapter Type 1 installation video
Your 2011-2024 Abarth 695 Hatch kit uses Adapter Type 1. Watch this matching OG Wipers adapter video before fitting the blades.
How to replace the wiper blades
- Lift the wiper arm away from the windscreen and support it carefully.
- Remove the old blade from the wiper arm. Keep one hand on the arm so it cannot spring back onto the glass.
- Fit the OG Wipers Adapter Type 1 connector if required.
- Slide or click the new blade into place until it locks securely.
- Lower the arm gently and test the wipers using washer fluid before driving.
- Repeat the process for the rear blade and test the rear wiper sweep.
Abarth 695 Hatch wiper FAQs
What size wiper blades does a 2011-2024 Abarth 695 Hatch use?
It uses a 24" (600mm) driver-side blade and a 14" (350mm) passenger-side blade. The rear blade is 12" (300mm).
Which adapter type do I need?
This vehicle uses Adapter Type 1 with the OG Wipers kit.
Can I buy the exact kit?
Yes. Use the 2011-2024 Abarth 695 Hatch Front + Rear Kit Wiper Blades product page to buy the exact kit linked to this guide.
What if my vehicle variant looks different?
Some imported, facelift, sedan, wagon, hatch, or rear-wiper variants can differ. If the year range or body style does not match your car, ask OG Wipers to confirm before ordering.